High-lifter Lift Kit for Polaris Bobcat 3450 Instrukcja Użytkownika Pobierz pdf

High Lifter Products, Inc. (318) 524-2270

780 N Professional Drive Fax (318) 524-2297

Shreveport, LA 71105

Polaris 700 Ranger Lift Kit Installation Instructions

Read Before Installation!

This product is designed for use on ATVs on which additional ground clearance and fender

clearance is desired. It is designed for utility type, slower-speed use on relatively flat terrain in deep

mud or snow. Although we have many thousands of satisfied lift kit customers and over 400

franchised dealers selling and installing lift kits, purchasers should be aware that use of this

product may increase the frequency of required maintenance, part wear, and will raise the center

of gravity on your ATV increasing risk of roll-over on side hills, ditches or other steep terrain.

We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to

improve stability of the ATV. Riders should be advised that the handling characteristics of a taller

ATV are different and require extra care when riding on side hills or off-camber situations. If you

further raise the center of gravity by adding heavy loads to racks or seats, the ATV must be

operated with care, at slower speeds or on relatively flat ground.

Operation of an ATV with or without a lift kit, while or shortly after consuming alcohol or drugs,

subjects the rider to the risk of serious bodily harm or possible death. This is compounded if the

rider does not wear an approved helmet and other safety gear. High Lifter urges that all approved

safety gear be worn when riding an ATV.

If this is not what you expected, or is not consistent with your intended use, you should return the

product immediately to the seller,

before installation, for a refund of the purchase price; less any

fees. After installation, product is warranted for 90 days for defects in workmanship and materials.

Warranty is limited to refund of the purchase price or replacement of the kit, at the seller’s option.

It does not include any other parts, labor, components, or consequential damages.

WARNING: The McPherson struts on the front of this ATV are preloaded and are under

extreme pressure. A spring compressor is required for the installation. Most local auto

parts stores carry spring compressors for around $25 for a very basic model. If you do not

have experience working with this type of tool, we strongly recommend that an authorized

factory dealer install this lift kit.

This job will be much easier if you will remove your front

plastic, which will allow you to pull the strut straight out from the top.

1 2 3 4 5 6

Podsumowanie treści

Strona 1 - Read Before Installation!

High Lifter Products, Inc. (318) 524-2270 780 N Professional Drive Fax (318) 524-2297 Shreveport, LA 71105

Strona 2 - Parts Diagram

Parts Diagram 2

Strona 3 - Front Lift

Front Lift 1) Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to support ATV properly so that it

Strona 4 - Rear Lift

8) Repeat this process on the other side. 9) Install the wheels, torque wheel lug nuts to manufacturer’s specifications, lower and remove jack. Che

Strona 5 - Reinstall the mufflers

7) Connect the rear support bracket to the frame using the ¼ x ¾” hex bolts, ¼” washers, and ¼” locking nuts. Use the holes already in the frame fro

Strona 6

12) Re-torque lug nuts after the first ride. 6

Komentarze do niniejszej Instrukcji

Brak uwag

High-lifter Lift Kit for Polaris Bobcat 3450 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy High-lifter Lift Kit for Polaris Bobcat 3450. High Lifter Lift Kit for Polaris Bobcat 3450 User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy High-lifter Lift Kit for Polaris Bobcat 3450