High-lifter Lift Kit for Ranger IRS - Signature Series 3 Instrukcja Użytkownika Pobierz pdf

780 Professional Dr. North, Shreveport, LA. 318-524-2270

Polaris 700 & 800 RANGER IRS Models

Lift Kit Installation Instructions

Read Before Installation

This product is designed for use on ATVs and/or RUVs to increase ground clearance and fender clearance. It is

designed for utility type, slow-speed use on relatively flat terrain in deep mud or snow. Although we have many

thousands of satisfied lift kit customers and over 1,800 franchised dealers selling and installing lift kits, purchasers

should be aware that use of this product may increase the frequency of required maintenance, part wear, and will raise

the center of gravity on your ATV and/or RUV, increasing risk of roll-over, injury and death on all types of terrain. It

is your responsibility to always inform other operators and passengers of this vehicle about the added risks.

We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to improve stability of the

ATV and/or RUV. Riders should be advised that the handling characteristics of a taller ATV and/or RUV are different

and require extra care when riding, particularly on side hills or off-camber situations. If you further raise the center of

gravity by adding taller tires, heavy loads to racks or seats, or by any other means, the ATV and/or RUV must be

operated with even more care, at slower speeds and on relatively flat ground. All turns should be done at a slow speed,

even on level ground.

Operation of an ATV and/or RUV with or without a lift kit, while or shortly after consuming alcohol or drugs, subjects

the rider to the risk of serious bodily harm or possible death. This risk is compounded if the rider does not wear an

approved helmet and other safety gear. High Lifter urges that all approved safety gear be worn when riding an ATV

and/or RUV as a driver or passenger.

If this product is not what you expected, or is not consistent with your intended use, you should return the product

immediately to the seller, before installation, for a refund of the purchase price; less any fees. After installation,

product is warranted for 90 days for defects in workmanship and materials. Warranty is limited to refund of the

purchase price or replacement of the kit, at the seller’s option.

Dealers and other Installers

You are responsible for informing your customer and end user of the information contained above and the increased

potential hazards of operating an ATV and/or RUV equipped with a lift kit. If you install the lift kit, it is your

responsibility to also install the warning label prominently in view of the driver and in prominent view of the driver and

passenger on RUVs and multi-passenger ATVs. They should also be instructed to notify anyone operating the vehicle,

as well as any passengers, that a lift kit is installed

As discussed above, it is critically important that they be instructed in the need for slower speed operation, regardless of

terrain, after this lift kit is installed.

NOTE: 1.5” WHEEL SPACERS ARE REQUIRED WHEN USING THE FACTORY POLARIS

WHEELS WITH THIS LIFT KIT INSTALLED. IT IS ALSO HIGHLY RECOMMENDED THAT 1” to

1.5” WHEEL SPACERS BE USED SO AS TO INCREASE THE WIDTH AND STABILITY OF THE

MACHINE EVEN IF AFTERMARKET WHEELS ARE INSTALLED. HIGH SPEED MANEUVERS

SHOULD BE AVOIDED WHEN THE MACHINE HAS BEEN LIFTED AND LARGER TIRES

MOUNTED.

1 2 3 4 5 6 7 8 9

Podsumowanie treści

Strona 1

1 780 Professional Dr. North, Shreveport, LA. 318-524-2270 Polaris 700 & 800 RANGER IRS Models Lift Kit Installation Instructions Read Before

Strona 2 - Parts Diagram

2 Parts Diagram

Strona 3 - Front Lift Installation

3 Front Lift Installation 1) Place ATV transmission in park. Place jack under center of ATV front end and lift until front wheels clear the groun

Strona 4

4 5) Connect bottom of the shock to the lift bracket using a 10mm x 70mm bolt and 10mm flat washer. 6) Now place a 10mm flat washer next to the

Strona 5 - Rear Lift Installation

5 8) You will need to remove some material from the area where lower control arm mounts to the frame. You will only need to remove a small area nea

Strona 6

6 5) Next, insert the bottom of the shock into the top of the bracket. Place one of the 10mm flat washers inside of the bracket on one side of the

Strona 7

7 ATTENTION 800 RANGER XP & HD ADDITIONAL INSTALLATION NOTES: 1. There is a change on the 2010 models and the rear sway bar needs to have a Smal

Strona 8

8 High Lifter Name Plate Installation 1. You will need to disassemble the tail gate. Remove the top rail and latch. Remove the screws that are on

Strona 9

9 5. Place the name plate back on the tail gate and insert the ¼ x ¾ button head bolts through the plate and plastic. On the backside of the tail g

Komentarze do niniejszej Instrukcji

Brak uwag

High-lifter Lift Kit for Ranger IRS - Signature Series 3 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy High-lifter Lift Kit for Ranger IRS - Signature Series 3. High Lifter Lift Kit for Ranger IRS - Signature Series 3 User Manual Instrukcja obsługi

Podsumowanie treści

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy High-lifter Lift Kit for Ranger IRS - Signature Series 3