High-lifter Looney Tuned Dual Exhaust for Arctic Cat Prowler 1 Instrukcja Użytkownika Pobierz pdf

ARCTIC CAT PROWLER XT21000

Removal:

You will need to remove the following items to install your new Looney Tuned

Exhaust System. Remove both seats, the center console, stock muffler, stock front and

rear headers, and the heat shield that surrounded the stock 2into1 piece

Install:

First, using the stock header bolts and stock exhaust gasket loosely install the LTE rear

header to the rear cylinder of the UTV; do not tighten the bolts yet. Repeat this step

with the front header on the front cylinder. Next install the rear midpipe to the rear

header and install the spring between the two pipes. Again repeat this step with the

front midpipe and front header. Next install the steel spacers into the stock muffler

mounting grommets as shown.

Install the supplied offset brackets as shown using the longer supplied button head bolts

Next install the mufflers to the midpipes and then the offset brackets. Tighten the all

four bolts on the offset brackets and install the remaining two springs between the

1 2

Strona 1

ARCTIC CAT PROWLER XT21000 Removal: You will need to remove the following items to install your new Looney Tuned Exhaust System. Remove both seat

mufflers and midpipes. Finally tighten all four head pipe bolts. NOTE Make sure the first time the UTV is started it is in a well ventilated area or

Brak uwag

High-lifter Looney Tuned Dual Exhaust for Arctic Cat Prowler 1 Instrukcja Użytkownika